Updates on Mclaren, Podium Base and GTS

1…1011131516…26

Comments

  • Lorrell WaddellLorrell Waddell Member
    it wont be long Now.
  • Joseph GossenJoseph Gossen Member, Moderator, DD Beta Tester, PHub Beta Tester, P BME beta tester
    edited April 2018
    Lorrell Waddell said:
    it wont be long Now.
    Stop teasing  :P
  • Brandon PowellBrandon Powell Member
    Wesley Stokes said:
    Brandon Powell said:
    Here's my question for Thomas: will the dual clutch work even if you have your Clubsport pedals connected via USB (and not connected directly to the wheel)? I connect my V3 inverted using USB to get proper throttle and brake vibration in all PC games using Fanaleds.
    Hey Brandon just curious what games are you having an issues with the break vibration not working? The only one I haven't played is Dirt, but mine work on all others without using Fanaleds.
    I think it was either Assetto Corsa or Automobilista that didn't work one time when Fanaleds crashed. Honestly, I'd never tried without fanaleds so I guess I'll try that this weekend. I have AC, AMS, iRacing, rFactor 2, R3E and Dirt Rally. Does it vibrate at a set pressure or does it actually detect wheel lockup?
  • Wesley StokesWesley Stokes Member
    When wheel lockup is detected, but you can set how sensitive it is
    Brandon Powell said:
    Wesley Stokes said:
    Brandon Powell said:
    Here's my question for Thomas: will the dual clutch work even if you have your Clubsport pedals connected via USB (and not connected directly to the wheel)? I connect my V3 inverted using USB to get proper throttle and brake vibration in all PC games using Fanaleds.
    Hey Brandon just curious what games are you having an issues with the break vibration not working? The only one I haven't played is Dirt, but mine work on all others without using Fanaleds.
    I think it was either Assetto Corsa or Automobilista that didn't work one time when Fanaleds crashed. Honestly, I'd never tried without fanaleds so I guess I'll try that this weekend. I have AC, AMS, iRacing, rFactor 2, R3E and Dirt Rally. Does it vibrate at a set pressure or does it actually detect wheel lockup?
    When wheel lockup is detected, but you can set how sensitive it is.
  • Brandon PowellBrandon Powell Member
    Wesley Stokes said:
    When wheel lockup is detected, but you can set how sensitive it is
    Brandon Powell said:
    Wesley Stokes said:
    Brandon Powell said:
    Here's my question for Thomas: will the dual clutch work even if you have your Clubsport pedals connected via USB (and not connected directly to the wheel)? I connect my V3 inverted using USB to get proper throttle and brake vibration in all PC games using Fanaleds.
    Hey Brandon just curious what games are you having an issues with the break vibration not working? The only one I haven't played is Dirt, but mine work on all others without using Fanaleds.
    I think it was either Assetto Corsa or Automobilista that didn't work one time when Fanaleds crashed. Honestly, I'd never tried without fanaleds so I guess I'll try that this weekend. I have AC, AMS, iRacing, rFactor 2, R3E and Dirt Rally. Does it vibrate at a set pressure or does it actually detect wheel lockup?
    When wheel lockup is detected, but you can set how sensitive it is.
    Just tested with USB and no Fanaleds; it doesn’t work in AC or AMS. So basically you’re saying it only works by itself when connected to a Fanatec wheel? Great cause I think I lost my RJ12 cable.
  • Wesley StokesWesley Stokes Member
    This maybe the difference, I like mine connected to the wheel so I can adjust brake strength through the rim.
    Brandon Powell said:
    Wesley Stokes said:
    When wheel lockup is detected, but you can set how sensitive it is
    Brandon Powell said:
    Wesley Stokes said:
    Brandon Powell said:
    Here's my question for Thomas: will the dual clutch work even if you have your Clubsport pedals connected via USB (and not connected directly to the wheel)? I connect my V3 inverted using USB to get proper throttle and brake vibration in all PC games using Fanaleds.
    Hey Brandon just curious what games are you having an issues with the break vibration not working? The only one I haven't played is Dirt, but mine work on all others without using Fanaleds.
    I think it was either Assetto Corsa or Automobilista that didn't work one time when Fanaleds crashed. Honestly, I'd never tried without fanaleds so I guess I'll try that this weekend. I have AC, AMS, iRacing, rFactor 2, R3E and Dirt Rally. Does it vibrate at a set pressure or does it actually detect wheel lockup?
    When wheel lockup is detected, but you can set how sensitive it is.
    Just tested with USB and no Fanaleds; it doesn’t work in AC or AMS. So basically you’re saying it only works by itself when connected to a Fanatec wheel? Great cause I think I lost my RJ12 cable.
    This maybe the difference, I like mine connected to the wheel so I can adjust brake strength through the rim.
  • Leo WongLeo Wong Member
    Estimated shipping date: 15/02/2018
    Actual shipping date: 20/04/2018
  • Leo WongLeo Wong Member

    Now just see if the postman comes from Germany or takes the slow boat from China..

  • Trevor SnowdenTrevor Snowden Member
    JP Mens said:
    Estimated shipping date: 15/02/2018
    Actual shipping date: 20/04/2018
    Where are these dates from? My last email from Fanatec said they would start shipping the 24th of April. But that email was some time ago and it’s from the Black Friday preorder.
  • Pierre HoffmannPierre Hoffmann Member
    Ita not a email. Its in youre account on the Fanatec Homepage
  • Leo WongLeo Wong Member
    Trevor Snowden said:
    JP Mens said:
    Estimated shipping date: 15/02/2018
    Actual shipping date: 20/04/2018
    Where are these dates from? My last email from Fanatec said they would start shipping the 24th of April. But that email was some time ago and it’s from the Black Friday preorder.
    Pierre is right.. Monday, Tuesday, we’ll see.. 


  • Mehmet EskikayaMehmet Eskikaya Member
    1Geplantes Lieferdatum: 15.02.2018 Tatsächliches Lieferdatum: 20.04.2018 Summe: 187,23€
  • Pierre HoffmannPierre Hoffmann Member
    edited April 2018
    Did any one receive a shipping mail from UPS?
  • Robert ShoolbredRobert Shoolbred Member
    Some did
  • Pierre HoffmannPierre Hoffmann Member
    No, only the confirmation from fanatec that the wheel has been shipped. Nothing from UPS or someone else
  • Robert ShoolbredRobert Shoolbred Member
    O sorry. Guess that's thru.. shipped anyway.
  • Brandon PowellBrandon Powell Member
    Woah...so I have a CSW 2.5...I just powered it on and it went full speed from wheel lock to wheel lock over and over (good things my hands were clear!)...it repeated this continuously so I turned the power off after about a minute. Disconnected and reconnected the rim and tried powering up again, it powered up normally this time (slow rotation). Has that happened to anyone in here before?
  • Matthias ZimmermannMatthias Zimmermann Member
    Looks like we will hold that beautifull new GT-wheel in our hands very soon. Will there be a new firmware for the wheel bases to properly recognize the GT wheel or are we set with versions 292 (CSW) / 293 (CSL) from autumn 2017.
  • Ad TiegelaarAd Tiegelaar Member
    Mine still not shipped.

    Estimated shipping date: 15/02/2018
    Actual shipping date:



  • Anders KristiansenAnders Kristiansen Member
    It looks like mine got shipped on Friday, but still waiting for the tracking from ups. On the details it looks like only the wheel got shipped and not the QR. Has any got the QR shipped?
  • Trevor SnowdenTrevor Snowden Member
    Both still say “payment verified” under order status.
  • Raul Rodrigo LoriteRaul Rodrigo Lorite Member
    edited April 2018

    Anders Kristiansen said:
    It looks like mine got shipped on Friday, but still waiting for the tracking from ups. On the details it looks like only the wheel got shipped and not the QR. Has any got the QR shipped?

    Both were sent on the 20th, but I bought both.

  • Maurice BöschenMaurice Böschen Member, CSL E RP1 PS4 beta tester, RMcL BT, CS SWFORM V2 Beta test, DD Beta Tester, PHub Beta Tester, P BME beta tester
    Matthias Zimmermann said:
    Looks like we will hold that beautifull new GT-wheel in our hands very soon. Will there be a new firmware for the wheel bases to properly recognize the GT wheel or are we set with versions 292 (CSW) / 293 (CSL) from autumn 2017.
    New driver v310 was just uploaded on both the download section of the wheel bases and the rim itself.
  • Marcin PluskaMarcin Pluska Member
    Maurice Böschen said:
    Matthias Zimmermann said:
    Looks like we will hold that beautifull new GT-wheel in our hands very soon. Will there be a new firmware for the wheel bases to properly recognize the GT wheel or are we set with versions 292 (CSW) / 293 (CSL) from autumn 2017.
    New driver v310 was just uploaded on both the download section of the wheel bases and the rim itself.
    v310 driver is compatible with csw v2? Because on csw v2 download page there is only v292 driver available...
  • Sánta LászlóSánta László Member
    Did anyone receive the Mclaren wheel?
  • Bernd ZiebellBernd Ziebell Member
    edited April 2018
    My order history says shipping order was transmitted to UPS on 20.04.; but I have not received a shipping notification from UPS yet. JUST GET THE UPS NOTIFICATION
  • Nico ErnstNico Ernst Member
    edited April 2018
    Bernd Ziebell said:
    My order history says shipping order was transmitted to UPS on 20.04.; but I have not received a shipping notification from UPS yet.


    same here

    26.11.2017WartenVielen Dank für Ihre Bestellung bei Fanatec.
    26.11.2017In BearbeitungWir haben Ihre Bestellung erhalten und bearbeiten diese derzeit.
    15.12.2017Zahlung bestätigtIhre Zahlung wurde bestätigt. Die bestellten Waren werden für den Versand vorbereitet. Sollten ein oder mehrere Artikel nicht an Lager sein, so wird der gesamte Auftrag nach Eingang der vorbestellten Artikel im Lager versendet werden.
    20.04.2018versendetIhr Auftrag wurde in den Versand übergeben. Das Transportunternehmen sendet Ihnen die Trackingdaten per E-Mail zu.


  • Hugo AraújoHugo Araújo Member
    Nico Ernst said:
    Bernd Ziebell said:
    My order history says shipping order was transmitted to UPS on 20.04.; but I have not received a shipping notification from UPS yet.


    same here

    26.11.2017WartenVielen Dank für Ihre Bestellung bei Fanatec.
    26.11.2017In BearbeitungWir haben Ihre Bestellung erhalten und bearbeiten diese derzeit.
    15.12.2017Zahlung bestätigtIhre Zahlung wurde bestätigt. Die bestellten Waren werden für den Versand vorbereitet. Sollten ein oder mehrere Artikel nicht an Lager sein, so wird der gesamte Auftrag nach Eingang der vorbestellten Artikel im Lager versendet werden.
    20.04.2018versendetIhr Auftrag wurde in den Versand übergeben. Das Transportunternehmen sendet Ihnen die Trackingdaten per E-Mail zu.


    +1
  • Hugo AraújoHugo Araújo Member
    just got the email form ups 
    Hugo Araújo said:
    Nico Ernst said:
    Bernd Ziebell said:
    My order history says shipping order was transmitted to UPS on 20.04.; but I have not received a shipping notification from UPS yet.


    same here

    26.11.2017WartenVielen Dank für Ihre Bestellung bei Fanatec.
    26.11.2017In BearbeitungWir haben Ihre Bestellung erhalten und bearbeiten diese derzeit.
    15.12.2017Zahlung bestätigtIhre Zahlung wurde bestätigt. Die bestellten Waren werden für den Versand vorbereitet. Sollten ein oder mehrere Artikel nicht an Lager sein, so wird der gesamte Auftrag nach Eingang der vorbestellten Artikel im Lager versendet werden.
    20.04.2018versendetIhr Auftrag wurde in den Versand übergeben. Das Transportunternehmen sendet Ihnen die Trackingdaten per E-Mail zu.


    +1

  • Pierre HoffmannPierre Hoffmann Member
    Just received my UPS notification for a minute!
Sign In or Register to comment.