I've upgraded to the latest Fanalab, driver and firmware, the good news is it has fixed all the problems I had with previous beta drivers.
Currently I'm running DD1, CSW v3, Shifter & Handbrake, with both a Universal Hub and Formula v2.
Software versions are:
Fanalab 1.47
Wheel Base Firmware : 674
Wheel Base Motor Firmware: 40
Wireless Quick Release Firmware: 6
PC Driver: 372
The only problem I've noticed so far is that the Active Devices section of the Fanalab Main screen shows the Podium Wheel Base DD1, ClubSport Steering Wheel Universal Hub for Xbox One but no pedals. I have the v3 pedals connected directly to the wheel base but they don't show up on the Active Devices screen, but I can configure them elsewhere in Fanalab (e.g. Vibration screen).
Any ideas?
Maurice BöschenMember, CSL E RP1 PS4 beta tester, RMcL BT, CS SWFORM V2 Beta test, DD Beta Tester, PHub Beta Tester, P BME beta tester
Is there a Grey silhouette? If yes, then there is a drop down arrow beneath it where you can choose which pedals you have. Fanalab can't detect the correct pedal set on its own, therefore you have to manually choose the right picture.
So I just updated my DD1 to 373 and Fanalab to 1.47.
Everything went well and Fanalab is detecting my DD1 and MCL GT3, but I have no tuning menu in fanalabs. I can only change the profile number and MPS function on this page. All the other pages in fanalab work as they should i think
I have used fanalab 1.12 before and it worked on that version.
Maurice BöschenMember, CSL E RP1 PS4 beta tester, RMcL BT, CS SWFORM V2 Beta test, DD Beta Tester, PHub Beta Tester, P BME beta tester
I did delete and uninstall and then install again, but nothing changes. I also tried fanalab 1.23beta to compare and its the same problem.
So the only way to see what the settings are at the moment ist the tuning menu preview on the Game profile page. To change something i have to export the pws and edit them directly .
They should be exactly the same as the recommended settings in the forum because exactly those recommended settings from the forum was copy/pasted into Tuning Menu Settings for each base.
im having a problem with fanalab where if i change the colour of my shift lights on my V2 it stops showing me my current speed even with it closed it doesnt fix the issue. i have to change the colours as im red/green colour blind so i change them to yellow to blue to cyan. on old fanalab itr worked fine but on new one it doesnt for some reason.
Sorry to bother you guys, but I have noticed that something acts different in new drivers/firmware/Fanalab with BME.
1. 9 led Rpm range.. +/- +1% from led light sometimes in full throttle it gets low and high again.
2a. Noticed that RPM code, overwrites Pit Limiter lights on 9led. For instance if you high Rev with clutch inside pit lane you lose "blue leds" from pit limiter. You need to turn off an on again.
2b. On 3+3 leds, pit entry leds are overwritten by pit limiter, even if I choose (obviously) different leds for each one.
Maybe can be related with "priority" code, or "black" instead of "off" string.
Game: rfactor2/iracing all the others you don't need to bother with pit entry.
I just wonder how it manages yellow flags, blue flags, slipping tires, everything together, what and how it will be showed.
have the exact same problem on rf2 i fixed it by tunring off the gear display and making sure all the led clours were default and it woked fine but can still be buggy after a pit stop as sometimes it stops working and others it keeps working
Comments
What was broken?
it never even worked before in v1.23
Mouse emulation is a driver feature, not a Fanalab feature.
sorry!
Still unable to open fanalabs in windows 10 just get as far as splash screen
Try deleting your whole Fanalab folder, located in c:\users\[username]\AppData\Local\PodiumControl and then restart Fanalab.
I've upgraded to the latest Fanalab, driver and firmware, the good news is it has fixed all the problems I had with previous beta drivers.
Currently I'm running DD1, CSW v3, Shifter & Handbrake, with both a Universal Hub and Formula v2.
Software versions are:
Fanalab 1.47
Wheel Base Firmware : 674
Wheel Base Motor Firmware: 40
Wireless Quick Release Firmware: 6
PC Driver: 372
The only problem I've noticed so far is that the Active Devices section of the Fanalab Main screen shows the Podium Wheel Base DD1, ClubSport Steering Wheel Universal Hub for Xbox One but no pedals. I have the v3 pedals connected directly to the wheel base but they don't show up on the Active Devices screen, but I can configure them elsewhere in Fanalab (e.g. Vibration screen).
Any ideas?
Is there a Grey silhouette? If yes, then there is a drop down arrow beneath it where you can choose which pedals you have. Fanalab can't detect the correct pedal set on its own, therefore you have to manually choose the right picture.
No, there's nothing, except at the bottom it says 'Not available (Wheel Base)' where it would usually say ClubSport v3 Pedals.
Fanalab has always detected the pedals correctly previously.
Edit: Sorry, yes, there is! I thought that was the one for the Hub, not the pedals... problem solved, thanks Maurice!
Thanks that worked 😀
So I just updated my DD1 to 373 and Fanalab to 1.47.
Everything went well and Fanalab is detecting my DD1 and MCL GT3, but I have no tuning menu in fanalabs. I can only change the profile number and MPS function on this page. All the other pages in fanalab work as they should i think
I have used fanalab 1.12 before and it worked on that version.
Try deleting your whole Fanalab folder, located in c:\users\[username]\AppData\Local\PodiumControl and then restart Fanalab.
That did not change anything. The only other thing that seems unusual is when i start Fanalab it opens an loads and then instantly minimizes.
Did you uninstall Fanalab and deleted the whole folder? The thing with the minimizing is in the settings.
I did delete and uninstall and then install again, but nothing changes. I also tried fanalab 1.23beta to compare and its the same problem.
So the only way to see what the settings are at the moment ist the tuning menu preview on the Game profile page. To change something i have to export the pws and edit them directly .
Have you installed driver and Fanalab on the same drive? Seems strange you have the same problem on both versions.
Hello, do you know why the settings recommended by fanalab are (very) different from those of the forum (or there is a fanalab link to the forum)
I don't see a problem here, they are the same for me like they are in the forum. Which wheelbase are you looking at?
They should be exactly the same as the recommended settings in the forum because exactly those recommended settings from the forum was copy/pasted into Tuning Menu Settings for each base.
im having a problem with fanalab where if i change the colour of my shift lights on my V2 it stops showing me my current speed even with it closed it doesnt fix the issue. i have to change the colours as im red/green colour blind so i change them to yellow to blue to cyan. on old fanalab itr worked fine but on new one it doesnt for some reason.
My "CSL Elite F1 Set Wheel" in this updated version appears as a "Clubsport Steering Wheel Formula Carbon"
You can change the picture in the driver in the settings Tab to match the Formula wheel you have.
In the settings of Fanalab? Cannot find it
You can change it Noth in the driver settings Tab and in Fanalab beneath the wheel by clicking on the drop down arrow.
OK found it, thanks
Hello Team, Maurice,
Sorry to bother you guys, but I have noticed that something acts different in new drivers/firmware/Fanalab with BME.
1. 9 led Rpm range.. +/- +1% from led light sometimes in full throttle it gets low and high again.
2a. Noticed that RPM code, overwrites Pit Limiter lights on 9led. For instance if you high Rev with clutch inside pit lane you lose "blue leds" from pit limiter. You need to turn off an on again.
2b. On 3+3 leds, pit entry leds are overwritten by pit limiter, even if I choose (obviously) different leds for each one.
Maybe can be related with "priority" code, or "black" instead of "off" string.
Game: rfactor2/iracing all the others you don't need to bother with pit entry.
I just wonder how it manages yellow flags, blue flags, slipping tires, everything together, what and how it will be showed.
Thanks for your help
Hi there!
Game: rF2
Wheelbase: CSW V2.5
Wheel: CS Formula V2
Issue: Speed is no longer displayed on the LED display, if selected to constant display it only shows '000'
Anyone else seen this, or know how to solve it?
Thanks!
😀
Switch to kph, mph isn't working
worked perfect for me
have the exact same problem on rf2 i fixed it by tunring off the gear display and making sure all the led clours were default and it woked fine but can still be buggy after a pit stop as sometimes it stops working and others it keeps working